Pressure ranges: up to 700 bar
Accuracy
20% to 100% of Full Scale: ±(0.1% of Reading)
0 to 20% of Full Scale: ±(0.02% of Full Scale)
Weight: 555g. (including batteries).

• New marine grade aluminum enclosure is sealed to IP67 (waterproof to 1 meter)
• Backlight is twice as bright, but batteries last just as long
• 10% larger LCD window for a larger viewing angle
• Internal pressure is equalized by a GORE-TEX® filter
• All XP2i gauges are now CSA, IECEx and ATEX certified intrinsically safe
• Captures open and reseat values for Pressure Safety Valve (PSV) testing
• Optional pressure datalogging capability
• Torque and force measurement capable
• Simple to use

Vacuum, for 2000kPa (300 PSI) and lower pressure gauges:
0 to -99.9 kPa (-14.5 PSIG): ±(0.25% of Full Scale), where F.S.: -99.9 kPa (-14.5 PSIG).
(Not recommended for continuous use at high vacuum.)
Display
Description: 5 Full (seven segment) digits.
Display rate: 3 readings per second.
Numeral Display height: 16.5mm (0.65”) single line display;
14 mm (0.55”) for main numerals of dual line display. Temperature
Operating & Compensated: -10°C to 50°C (14°F to 122°F).
Storage: -40°C to 75°C (-40°F to 167°F).

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Range: Vac to 3000 psi
Accuracy: ±0.2% of reading from 20% to 100% of full-scale;
±0.04% of full-scale from 20% to 100% of full-scale
Weight: 325g.

• One M1 gauge can replace up to five 0.25% mechanical gauges with an accuracy reading of 0.2%.
• Enclosure is rated to NEMA 4, IP65
• Can be customized for specific vendor applications
• Battery life up to 3 years continuous use
• Bright backlit display
• G ¼ B BSP parallel fittings available
• Protective boot included

Display: 5-digit LCD, 0.66"H
Process: connection 1/4" NPT(M)
Power: Two AA batteries
Operating temperature: 14 to 122°F (-10 to 50°C)

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Input Pressure Ranges
1 psi*/70 mBAR; 15 psi/1 BAR, 30 psi/2 BAR; 100 psi/7 BAR; 300 psi/20 BAR; 500 psi/30 BAR;; 1,000 psi/70 BAR; 2,000 psi/140 BAR; 3,000 psi/200 BAR; 5,000 psi/300 BAR; 10,000 psi/700 BAR; -15 to +15 psi*; -15 to +30 psi*
Accuracy
±0.05 % FS positive pressure
±0.1 % FS for 1.0 psi
Dimensions: 4.375" x 5.0" x 1.50"

Accuracy of ±0.05% of F. S.

Temperature compensated accuracy over 0 to 50 °C

13 standard pressure ranges available

Displays in 18 standard or 1 custom engineering unit

Displays ambient temperature in °C or °F

Large, back-lit, 5-1/2 digit display with 0.65" high digits and 20 segment bar graph

Rugged stainless steel case meets NEMA 4/IP65

MIN/MAX recall

Adjustable TARE zeros large system offsets

User-confi gurable sample rate maximizes measurement performance and battery life

User-confi gurable damping smooths readings from pulsating/plant air sources

Auto Shut-off for extended battery life

Low battery indicator

CSA intrinsically safe, Class 1, Div. 2 Groups A, B, C & D; ATEX approval pending; CE approved

Available with optional 24 V external power input

Rubber boot standard on all stand-alone bottom

mount gauges

Temperature Compensation
0 °C to +50 °C (32 °F to +122 °F) to rated accuracy
Standard Engineering Units
PSI, Bar, Kg/cm2, inH2O (4 °C, 20 °C or 60 °F), ft H2O (4 °C, 20 °C or 60 °F), cmH2O (4 °C and 20 °C), mH2O (4 °C and 20 °C), Kpa, mBAR, inHg, mmHg, TORR
Media Compatibility
liquids and gases compatible with 316 stainless steel;
except for ranges marked * above
Environmental
Operating Temperature: -10 °C to +55 °C
Storage: -20 °C to +70 °C (-4 °F to +158 °F)
Mechanical
Input Port: 1/4" male NPT
Display
5 Digits, 0.65" (16.53 mm) height
Bar Graph – 0 to 100% in 20 segments
Power
Battery: three (3), size AA alkaline batteries
Battery Life: 1,500 hours without backlight; 2,000 hours at slow sample rate; battery life can be displayed on bar graph to indicate the amount of time left.
Low Battery Indicator: displayed icon near the end of battery life
Includes: manual, batteries

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Pressure ranges: up to 300 bar
Accuracy: 0 to Full Scale: ±(0.05% of Reading + Floor Term*)
*Floor Term = 0.005% of FS or display resolution, whichever is greater.
Dimensions: 29mm (1.15") D x 70mm (2.75") W x 130mm (5.4") L
Weight: Model 33: 400g (14.0 oz), Model 31: 342g (12.0 oz)

• Small enough to fit in your shirt pocket, but big enough to handle all your calibration needs
• Wide pressure range can measure vacuum and high pressure up to 5000 PSI (300 bar)
• Indicates milliamps to calibrate transmitters
• Ultra compact and light
• High accuracy
• Battery operated
• Digital interface
• Brings laboratory accuracy to outdoor field conditions

Vacuum: ±(0.25% of Reading + Vacuum Floor Term*)
* Vacuum Floor Term (VFT):
For 16 and 36 PSI, VFT = 0.004 PSI
For 300 PSI, VFT = 0.01 PSI
For 1 or 2 bar, and 100 or 200 kPa, VFT = 0.03 kPa or 0.0003 bar
For 20 bar or 2000 kPa, VFT = 0.1 kPa or 0.001 bar
Vacuum operation is not specified for 600 PSI (40 bar/4000 kPa models and higher. However, all models can be safely connected to vacuum.
(Not recommended for continuous use at high vacuum.)
Temperature
Operating & Compensated: 0°C to 50°C (32°F to 122°F).
Storage: -20°C to 70°C (-4°F to 158°F).
Electrical
Range: 0 to 55 mA
Resolution: 0.001 mA
Accuracy: ±(0.025% of Reading + 0.001 mA)
Percentage Conversion: 4 mA = 0.00%; 20mA = 100.00% or 10 mA = 0.00%; 50 mA = 100.00%
Intrinsic Safety
Exia Intrinsically Safe, Class I, Groups A, B, C & D, Temperature code T4
Connections
Pressure connection: 1/8" female NPT.
Electrical connection: 4mm jacks, 19mm (0.75") spacing.
Media Compatibility
Liquids and gases compatible with PTFE (Polytetrafluoroethylene) penetrated and anodized aluminum sensor manifold, 316 stainless steel (sensor), PTFE can be eliminated, if required, by specifying option SPSS, in which case aluminum manifold(s) will be replaced with stainless steel manifold(s).
Note: Over-range occurs at 110% of full scale, causing "HP Over" or "LP Over" to be displayed.
Standard factory setting is 1"H2O = 0.036126 PSI (density of water @ 4°C). Specify at time of order if you require a different density (e.g., for water @ 68°F, 1"H2O= 0.036063 PSI).
Power
Battery: One 9V battery.
Battery life: 90 hours typical (alkaline battery).
Low battery indicator: Displayed battery icon.
Enclosure
Description: Extruded Aluminum with sealed membrane keypad.
Model 31(1500 PSI and above): 360g (13.0 oz)
Sensor
All welded stainless steel sensor

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Pressure ranges to 20,000 psi (1400 bar)
• 0.05% full scale (FS) accuracy
• Weight: 13 oz (350 g) approximate
• Diameter: 3.74 in (95 mm) excluding pressure fittings
• Depth: 2.17 in (55 mm)

• Eleven selectable pressure units
• % pressure indication and additional bar graph for quick visual reference
• Temperature compensated accuracy from 14-122 degrees F (-10 to 50 degrees C).
• 0-5V analog output
• IDOS compatible and RS232 interface

Accuracy
0.05% FS including non-linearity, hysteresis, repeatability and temperature effects from 14°F to 122°F (-10°C to 50°C)
Resolution
Maximum five digits
Burst Pressure
Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar).
Selectable Pressure Units
kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg
Display
Pressure reading: 5 digits with 0.5 in (12.7 mm) character height
Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height
Pressure Bar Graph
In addition to the numeric pressure indication, the DPI 104 LCD display contains a round twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user-selectable range.
Display Update
Two times per second
Minimum/Maximum Values
The minimum and maximum pressure values can be displayed on the DPI 104. This function can be enabled/disabled, and reset by the user.
Switch Test
The DPI 104 features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω.
Voltage Output
The DPI 104 can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1%
FS accuracy from 50 mV to 5 V.
Alarm Output
The alarm output consists of an open drain field effect transistor (maximum current 250 mA, maximum voltage 24 VDC)
Adjustable Mounting Positions
For added convenience, the DPI 104 housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.
Menu Lock
To guard against unauthorized menu access, the DPI 104 features a menu and tare lock function
RS232 Interface
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA090-1-VO). Using this link all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.
Network Capability
Up to 99 DPI 104 instruments can be connected together in a daisy chain-configured network.

• Manual (PDF)
• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Ranges 0 to 1 psi through to 10,000 psi (0 to 70 mbar through to 700 bar)
• 0.1% full scale (FS) accuracy
• Dimensions: 190 x 90 x 36mm.
• Weight: 500g.

• Rugged, lightweight handheld design
• Leak test, tare, max/min and filter
• Intrinsically safe version
• Standard ranges available from stock
• Optional pneumatic and hydraulic hand pumps

DPI 705 internal sensor version The DPI 705 includes an internal sensor and has a 1/8 in NPT female or G 1/8 female (with 4 mm ID hose adaptor) pressure connector. Most internal ranges are available from stock. DPI 705R remote sensor version The remote sensor of the DPI 705R has an integral cable connector, a 3 ft (1 m) mating cable and a 1/4 in NPT female or G 1/8 female pressure connector. Accuracy ±0.1% FS non-linearity, hysteresis and repeatability. Environmental Temperature Performance Averaged 32°F to 122°F (0°C to 50°C)

• ±0.01% rdg/°F (±0.02% reading/°C)
• For absolute ranges < = 15 psi (1 bar) add ±0.025% FS/°F (±0.05% FS/°C)
• For absolute ranges > 15 psi (1 bar) add ±0.01% FS/°F (±0.02% FS/°C)
• Calibrated range: 32°F to 122°F (0°C to 50°C)
• Operating range: 15°F to 122°F (-10°C to 50°C)

Humidity 0 to 95% non condensing. Overpressure Safe to 2 x FS. Display flashes at 110% FS. Media Compatibility

• Internal sensor: stainless steel, except positive differential non-corrosive fluid and negative differential dry gas.
• Remote sensor: stainless steel, except negative differential non-corrosive fluid.

Safety Conformance EN61010, EN50081-1, EN50082-2, CE marked Intrinsically safe version

• Ex ia IIC T4 (-10°C to 50°C) to CAN/CSA E79-11-95 and CAN/CSA E79-0-95, (Class I, Division 1, Groups A,B,C&D)
• EEx ia IIC T4 (-10°C to 50°C) to ATEX EN50020:1994 and EN500014:1992

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Ranges to 103 inHg absolute
• Accuracy: ±0.004 inHg absolute
• Weight: 1.1 lb (0.5 kg) nominal
• Dimensions: 7.5 in x 3.5 in x 1.4 in (190 mm x 90 mm x 36 mm) nominal

• 6 digit resolution LCD display
• Multiple pressure scales and aeronautical units
• Alkaline or rechargeable batteries
• Lightweight hand-held rugged design
• RS232 output

Pressure Measurement Operating Ranges 22-34 inHg absolute Alternate Pressure Ranges Available 1-38 inHgA 1-77 InHgA 1-103 inHgA Maximum Safe Working Pressure 118 inHgA Pressure Media Compatible with non-corrosive gases. Insensitive to media density. Readout and Display 999999 capability LCD digits 0.54 inch high with additional 16 text characters. Display Overload Instrument capable of nominal 110% FS for each range. Above this, error code will flash. Resolution 0.0003 inHg absolute Response 2 readings per second nominal on digital display. Operating Modes a) Local pressure (QFE) b) Sea level pressure (QFF) from user set c) Altitude above user set datum Process Features Max/min, reading store, tare and programmable filter available in all operating modes. Pressure Units 24 units plus altitude in feet (ft) or meters (m). Performance Accuracy ±0.02% FS For all pressure ranges include: Combined non-linearity, hysteresis, repeatability, and temperature effects over 15° to 120°F. Optional enhanced barometric accuracy available (see Option A).

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Pressure ranges: up to 1000 bar
Accuracy: 0.005%
Weight DPI 620 only: ≈ 575 g (1.3 lb) – battery included.
Size (L: W: H) DPI 620 only: 183 x114 x 42 mm (7.2 x 4.5 x 1.7 in)

Operating temperature -10 to 50°C (14 to 122°F)
Storage temperature: -20 to 70°C (-4 to 158°F)
Ingress Protection: IP65 (DPI 620 calibrator only)

• Measure, source and simulate multiple parameters
• HART digital communicator
• Easy-to-use, with video quality touch screen, which can be operated by a gloved hand
• Weather-proof to IP 65
• Can display up to 6 active readings
• Available with a range of add-on modules, pressure measurement modules and generation stations, Intecal Field
• Calibration documenting module, 300Vac measurement probe
• Digital interface for pressure modules and future options USB master and slave for connecting to a PC and peripherals
• Available in Windows CE version
• Long-life Lithium-Polymer battery pack

Display: LCD: Colour display with touch-screen
Humidity: 0 to 90% relative humidity (RH) non-condensing
Shock/Vibration: Def Stan 66-31, 8.4 cat III
EMC: Electromagnetic compatibility: BS EN 61326-1:2006
Electrical safety: Electrical - BS EN 61010:2001
Pressure safety: Pressure Equipment Directive - Class: Sound Engineering
Practice: (SEP)
Approved: CE Marked
Battery power:
Lithium-Polymer battery (GE Part number: 191-356)
Capacity: 5040 mAh (minimum), 5280 mAh (typical)
Nominal voltage: 3.7 V.
Charge temperature: 0 to 40°C (32 to 104°F)
Note: When the instrument senses the temperature is outside
this range, it stops charging.
Discharge temperature: -10 to 50°C (14 to 122°F).
Charge/discharge cycles: > 500 > 70% capacity

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
• IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
• Weight: Maximums 190 x 85 x 50 mm
• Dimesnsions: 530g.

Single or dual range configuration

mA measure, switch test and 24V loop power

Large backlit display, menu driven interface

HART® loop resistor

Robust and weatherproof

Compact, simple to use, easy to carry

Convenient, one-handed operation

Secure grip, impact resistant, elastomer protected

Intelligent Digital Output Sensor (IDOS) Universal Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar). Total Flexibility
IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can become a fully featured pressure calibrator. Plug and Play Modules are interchangeable between instruments, requiring no set-up or instrument calibration. Range Expansion Achieved by adding modules (please refer to the IDOS Universal Pressure Module datasheet). *S_Standard Accuracy Total accuracy over 32°F to 122°F (0°C to 50°C), including one year stability and calibration uncertainty *P_Premier Accuracy

• Precision over 65°F to 82°F (18°C to 28°C)
• For operation over 41°F to 113°F (5°C to 45°C):
0.014% FS for ranges above 10 psi (700 mbar) 0.075% FS for ranges below 15 psi (1 bar)
• Stability over a year:
0.01% reading ranges above 5 psi (350 mbar) 0.03% reading ranges below 10 psi (700 mbar)
• Calibration uncertainty: 50 ppm of reading

Single or Dual Range One or two internal sensors can be selected. For dual range instruments, G/D ranges will be configured as G (gauge). Only one of the two sensors can be 1500 psi (100 bar) or above. Overpressure (maximum transient/intermittent pressure)

• 5 psi (350 mbar) and below 4 x FS
• Maximum working pressure: 1.1 x FS

Pressure Connections 1/8 NPT female or G 1/8 female

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Generates pneumatic pressures to 3000 psi (200 bar)
• High accuracy 0.025% full scale (FS)
• Weight: 28 lb (12.8 kg)
• Approximate size (w x l x d): 16.9 in x 10 in x 6.5 in (429 mm x 254 mm x 165 mm)

• Dual channel readout: pressure and electrical
• Self contained rechargeable gas cylinder
• RS232 interface and documenting versions
• Coarse/fine adjust selection
• Built-in Nitrogen/Air cylinder; maximum refill pressure 3000 psi (200 bar).
• Storage volume: 122 cubic inches (2 liters).
• Recommended media: Oxygen Free Nitrogen (OFN)
• Remote pressure sensors: Please consult factory for list.

Pressure Source

• Built-in Nitrogen/Air cylinder; maximum refill pressure 3000 psi (200 bar).
• Storage volume: 122 cubic inches (2 liters).
• Recommended media: Oxygen Free Nitrogen (OFN)
• Remote pressure sensors: Please consult factory for list.

Pressure Units 25 scale units plus one user defined mA Source Auto 10-sec. step cycle and programmable ramp (60 seconds end-to-end) Process Functions Filter, maximum/minimum, tare, flow, and % span Power Management Auto power off, auto backlight off, battery status indicator Display 2.36 in x 2.36 in (60 mm x 60 mm) graphic LCD with backlight, +/-99999 readout, two readings per second Data Storage 92 kbytes memory Environmental Temperature

• Operating range: 15°F to 120°F (-10°C to 50°C)
• Calibrated: 15° to 105°F (-10°C to 40°C)

Humidity 0 to 90%, non-condensing Sealing Type 12/IP54 in operation (IP65 when closed) Conformity EN 61010, EN 61326 Class A, CE marked Power supply Battery powered 6 x 1.5 V NiCad cells_20 hours nominal use at 68°F (20°C). The unit will operate from an AC power supply, 85 to 265 V, 45 to 400 Hz, and allow the battery pack to recharge. A low battery condition is indicated on the display.

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Ranges -14.7 to 10,000 psi
• Accuracy 0.025% full scale (FS) all ranges
• Weight: 7.7 lb, size 11.8 in x 6.7 in x 5.5 in

• Integral combined pressure/vacuum pump
• Dual readout: input and output
• 4 to 20 mA loop test: auto step and ramp
• Intrinsically safe (IS) version
• RS232 interface and fully documenting version
• Remote pressure sensors

Accuracy: 0.025% FS for ranges 1 to 10,000 psi Ranges: 1 psi to 10,000 psi including gauge, absolute and differential versions Integral Pneumatic: –22 inHg to 300 psi Integral Hydraulic: 0 to 6000 psi Measure Pressure, mA, V, switch state (open/closed) and ambient temperature Output: Pressure, mA step, mA ramp, mA value Energizing Supplies: 10 and 24 VDC (not IS version) Data Storage: 92 Kbytes Documenting (DPI 615 only): Error analysis with pass/fail status and graphs. two-way PC communication for transferring procedures and results Remote pressure sensors: Up to 10 digitally characterized sensors per calibrator

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Standard Available Pressure Ranges - 30 psi Compound, 30 psig, 100 psig, 500 psig, 1,000 psig, 3,000 psig, 5,000 psig, and 10,000 psig
• Reference Class Accuracy of ±0.04% of Reading ±0.01% Full Scale
• Temperature Compensated Accuracy over 0 to 50°C
• Dimensions: 4.375" x 5.0" x 1.50"

• Large, Back-lit, 5-1/2 Digit Display With 0.65" High Digits and 20 Segment Bar Graph
• Displays in 18 standard or fully custom engineering units
• CSA Intrinsically Safe, Class 1, Div. 2; ATEX Approved
• User Configurable Sample Rate Maximizes Measurement Performance and Battery Life
• Auto Shut-off Extends Battery Life
• Auto Shut-off and Damping Functions
• Adjustable TARE Zeros Large System Offsets
• Rear Mount Option for Panel Mounting (housed in separate panel-mount-style enclosure)
• Rubber Boot Standard On All Stand-alone Bottom Mount Gauges
• Available With Optional 24V External Power Input (housed in separate panel-mount-style enclosure)
• Optional Calibration Kit with Pneumatic or Hydraulic Pressure Hand Pump and Fittings Available
• BetaLOG™ Software Available for Logging Gauge Measurements
• Includes NIST Certificate with calibration data
• CE Approved

Input Ranges 30 PSI Compound (C/V), 30 psi, 100 psi, 500 psi, 1000 psi, 3000 psi, 5000 psi, 10,000 psi Accuracy ±0.04% of reading, ±0.01% FS Vacuum accuracy of the compound range is 0.1% of the 30 psi full scale. Vacuum measurement not calibrated for other ranges. Temperature Compensation 0 °C to +50 °C (32 °F to +122 °F) to rated accuracy Standard Engineering Units PSI, Bar, Kg/cm2, inH2O (4 °C, 20 °C or 60 °F), ft H2O (4 °C, 20 °C or 60 °F), mmH2O, cmH2O (4 °C and 20 °C), mH2O (4 °C and 20 °C), Kpa, mBAR, inHg, mmHg, TORR Media Compatibility liquids and gases compatible with 316 stainless steel; 30 C/V range non-corrosive gases and liquids Environmental Operating Temperature: -10 °C to +55 °C
Storage: -20 °C to +70 °C (-4 °F to +158 °F)
Input Port: 1/4" male NPT
Display
5 Digits, 0.65" (16.53 mm) height>
Bar Graph – 0 to 100% in 20 segments Power Battery three (3), size AA alkaline batteries Battery Life 1,500 hours without backlight; 2,000 hours at slow sample rate; battery life can be displayed on bar graph to indicate the amount of time left Low Battery Indicator displayed icon near the end of battery life Includes: manual, batteries

• Manual (PDF)
• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Isolated SS sensors on 300 psi and 3,000 psi units; Gauge only
• Accuracy: ±0.05% of FS
• Dimensions: (without boot): 5.7” H x 3.5” W x 1.43” D (144.7 x 80.0 x 36.3 mm)
• Weight: 14 ounces (396 gms.)

• High accuracy gauge and differential capability on 10" H2O, 200 in H20, 1 PSI, 30 PSI, 100 PSI
• Rugged, dust tight, water-resistant case
• Easy to read Super-Twist LCD
• Intuitive controls make operation easy, even for infrequent users
• Powered by a common 9 Volt alkaline battery
• Supplied in neoprene sleeve; optional carrying case available.
• Includes NIST Certificate with calibration data

Ranges:

• -14 to 30 PSIG/PSID
• -14 to 100 PSIG/PSID
• -14 to 300 PSIG
• -14 to 3000 PSIG
• ±10” H2O
• ±200” H2O (0-7 PSI)

Accuracy:

• 18 °C to 28 °C
• ±10” H2O: ±0.1% of FS
• ±200” H2O: ±0.05% of FS
• 30 PSI: ±0.05% of FS
• 100 PSI: ±0.05% of FS
• 300 PSI: ±0.05% of Rdg ± 2 LSD
• 3,000 PSI: ±0.05% of Rdg ± 2 LSD

Resolution:

• ±10” H2O: 0.001” H2O
• ±200” H2O: 0.01” H2O
• 30 PSI: 0.001 PSI
• 100 PSI and 300 PSI: 0.01 PSI
• 3,000 PSI: 0.1 PSI

Engineering Units:

• PSI, inH2O, cmH2O, mH2O, FtH2O, mBAR, BAR, inHg, mmHg, cmHg, kPa, kg/cm2, TORR, ATM

Temperature Stability:

• ±0.01% FS/°C
• 0 °C to 18 °C, and 28 °C to 50 °C

Maximum Overpressure

• Ranges >100 PSI: 2x
• Ranges <30 PSI: 3x

Ports: Two 1/8” FNPT Media

• 30/100 PSI, 10” H20, 200” H2O: non-corrosive gas or liquids
• 300/3,000 PSI: all media

Environmental<

• Operating Temperature: 0 °C to +50 °C
• Storage Temperature: -20 °C to +60 °C

Power Requirements: 9 VDC

• Battery: 1, 9V alkaline battery

• 006P/ IEC 6F22/NEDA1604

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Ranges Available Pressure: Gauge (PSIG): 0.3*, 1*, 5*, 7, 15, 30, 50, 100, 150, 300, 500, 1000, 1500, 3000, 5000, and 10000 Absolute (PSIA): 15, 30, 100, 150, 300 Compound (PSIG): -15 to +15, -15 to +30
Accuracy: up to 0.05%
Dimensions: 8.3” high x 3.9” wide x 1.8” deep (21.082 cm x 9.906 cm x 4.512 cm)
Weight: 1 pound 4 ounces (0.567 kg)

• Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
• Temperature-compensation ensures accuracy in field applications
• External pressure module connection supports all BETA Port-P pressure modules (29 ranges) for even more measurement capability
• Measure 4-20 mA input
• Measure up to 30 V DC
• Large graphic style LCD with backlight
• Switch test on pressure 1, pressure 2 or external pressure module
• Operating mode layers support simple measurements to complex applications
• Up to five frequently used setups to be stored; last setup automatically recalled on power-up
• % Error and damping functions
• Gas flow/custody transfer kit available
• NIST Certificate with calibration data

Differential (PSID/PSIG): 1*, 5*, 30*, 50*, 100* (BetaGauge 311A only) mA: 0 to 24.000 mA Volts: 0 to 30.000 VDC RTD: -50 °C to 105 °C (-40 °F to +220 °F) Engineering Units: psi, bar, mbar, kPa, kgcm2, cmH2O@4°C, cmH2O@20°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, mmHg@0°C, mmH2O@20°C, inHg@0°C, ftH2O@4°C, ftH2O@20°C, ftH2O@60°F Accuracy Pressure:
• 0.3 psi: ±0.1% FS
• 1.0 psi: ±0.05 %FS
• 15 to 3000 psi: ±0.025 %FS
• 5, 7, 5000, 10000 psi: ±0.035 %FS
• mA: ±0.015% of rdg; ±0.002 mA
• Volts: ±0.015% of rdg; ±0.002
RTD Input Range (Pt100-385): -40 °C to +105 °C (-40 °F to +220 °F) Temperature Effect: No effect on accuracy on all functions from 5 °C to 35 °C Add ±0.002 %FS/°C for temperatures outside of 5 °C to 35 °C General Instrument Setup/Recall: 5; last used on power-up Environmental Operating Temperature: -10 °C to +50 °C Storage Temperature: -20 °C to +60 °C Power Requirements: 6.0 VDC Battery: Four (4) standard Alkaline AA batteries Battery Life: >35 hours, typical usage Connectors/Ports Pressure Pressure: 1/8” female NPT - Stainless Steel RTD: 4 pin LEMO style External module: 6 pin LEMO style Included Accessories: soft case, batteries, manual, NIST-traceable certificate, and test leads

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Available Pressure: Gauge (PSIG): 0.3*, 1*, 5*, 7, 15, 30, 50, 100, 150, 300, 500, 1000, 1500, 3000, 5000, and 10000 Absolute (PSIA): 15, 30, 100, 150, 300 Compound (PSIG): -15 to +15, -15 to +30
Accuracy: up to 0.05%
Dimensions: 8.3” high x 3.9” wide x 1.8” deep (21.082 cm x 9.906 cm x 4.512 cm)
Weight: 1 pound 4 ounces (0.567 kg)

• One isolated, stainless steel pressure sensor except for 10" H2O and 1 psi Ranges
• Temperature compensation to ensure field use accuracy
• Power-Tool-Tough Housing
• 2 Custom Engineering Units
• Enhanced Measurement Stability
• External pressure module connection supports all BetaPort-P pressure modules
• Large Backlit configurable display for 1,2 or 3 variables
• Switch test on Pressure (Internal or External)
• % Error and damping functions
• RS-232 port for remote operation
• Differential and Absolute Ranges available
• Quik-Test Pressure Calibration Connectors Available
• Included NIST Certificate with calibration data

Differential (PSID/PSIG): 1*, 5*, 30*, 50*, 100* (BetaGauge 311A only) mA: 0 to 24.000 mA Volts: 0 to 30.000 VDC RTD: -50 °C to 105 °C (-40 °F to +220 °F) Engineering Units: psi, bar, mbar, kPa, kgcm2, cmH2O@4°C, cmH2O@20°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, mmHg@0°C, mmH2O@20°C, inHg@0°C, ftH2O@4°C, ftH2O@20°C, ftH2O@60°F Accuracy Pressure: 0.3 psi: ±0.1% FS 1.0 psi: ±0.05 %FS 15 to 3000 psi: ±0.025 %FS 5, 7, 5000, 10000 psi: ±0.035 %FS mA: ±0.015% of rdg; ±0.002 mA Volts: ±0.015% of rdg; ±0.002 V RTD Input Range (Pt100-385): -40 °C to +105 °C (-40 °F to +220 °F) Temperature Effect: No effect on accuracy on all functions from 5 °C to 35 °C Add ±0.002 %FS/°C for temperatures outside of 5 °C to 35 °C General Instrument Setup/Recall: 5; last used on power-up Environmental Operating Temperature: -10 °C to +50 °C Storage Temperature: -20 °C to +60 °C Power Requirements: 6.0 VDC Battery: Four (4) standard Alkaline AA batteries Battery Life: >35 hours, typical usage Connectors/Ports Pressure Pressure: 1/8” female NPT - Stainless Steel RTD: 4 pin LEMO style External module: 6 pin LEMO style Included Accessories: soft case, batteries, manual, NIST-traceable certificate, and test leads

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Input Ranges: 1 psi, 5 psi, 30 psi, 100 psi, 300 psi
Accuracy: All pressure ranges ±0.05 % FS
Dimensions: 21 cm H x 10 cm W x 4.6 cm D (8.3” H x 3.9” W x 1.8”D)
Weight: 1 lb., 4 oz. (0.57 kg)

• One non-isolated pressure sensor
• Internal 24 Volt DC loop power supply
• External pressure module connection supports all BetaPort-P pressure modules
• Measure 24 mA or 30 Volt DC
• Large, Backlit configurable display for 1, 2 or 3 variables
• Switch test on Pressure (Internal or External)
• % Error and damping functions

4-20 mA measurement ±0.015 % of rdg; ±0.002 V Temperature Compensation 18 °C to 23 °C (64 °F to +73 °F) to rated accuracy Standard Engineering Units psi, bar, mbar, kPa, kgcm2, mmH2O@4°C, mmH2O@20°C, cmH2O@4°C, cmH2O@20°C, mH2O@4°C, mH2O@20°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, mmHg@0°C, inHg@0°C, ftH2O@4°C, ftH2O@20°C, ftH2O@60°F Media Compatibility liquids and gases compatible with 316 stainless steel Environmental Operating Temperature: -10 °C to +55 °C
Storage: -20 °C to +60 °C (-4 °F to +140 °F)
Input Ports Pressure (1) J” FNPT, BetaPort-P pressure module, std. banana jacks for mA and V. Display Large, backlit, confi gurable display for 1, 2 or 3 variables Power Battery: four (4), size AA alkaline batteries Battery Life: >35 hours continuous typical usage Accessories (included): carrying case, test leads, instruction manual, set of four AA alkaline batteries, and a calibration certificate. Kits include the BetaGauge 301 Pressure Calibrator, carrying case, pneumatic pump, connections and fittings. Martel

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Available Pressure:
PSIG: -12 to 30 PSI /-0.8 to 2 bar (electric pump)
-12 to 150 PSI /-0.8 to 10 bar (electric pump)
-12 to 300 PSI / -0.8 to 20 bar (manual pump)
Pressure accuracy: ±0.025% of full scale on internal sensor module dependent for external sensors
Dimensions: 8” high x 4” wide x 2-3/8” deep (20 cm x 10 cm x 6 cm)
Weight: 2.5 pounds (1.2 kg)

• Pump that Generates Pressure up to 300 PSI and Vacuum up to -12 PSI
• Operates on 8 Standard Alkaline AA Batteries
• Pt100 RTD input for Temperature Measurement with Accuracy of 0.1°C (0.2°F)
• 24 Volt Loop Power to Operate Device under Test
• Large LCD with Backlight
• External Pressure Module Interface Supports all 29 BetaPort-P Pressure Modules
• Store and Recall up to 5 User Defined Setups
• Pressure Displayed in the User's Choice of 19 Engineering Units
• Switch Test is Automatic Using Internal Sensor or External Pressure Module
• Ideal for Gas Flow Calibration (Custody Transfer) Applications
• Quik-Test Pressure Calibration Connectors Available

Ranges
mA: 0 to 24 mA, max, load 1000 Ohms
RTD: Pt100, -50 to 150°C
Engineering Units
psi, bar, mbar, kPa, kgcm2, cmH2O@4°C, cmH2O@20°C, mH2O@4°C, mH2O@20°C, inH2O@4°C, inH2O@20°C, inH2O@60°F, mmHg@0°C, inHg@0°C, ftH2O@4°C, ftH2O@20°C, ftH2O@60°F
Instrument Power Supply: 24 VDC at 24 mA
Accuracy
Add 0.005% FS/°C outside of 15 to 35°C
mA: ±0.015% of reading ± 2 counts (simulation and measurement)
Volts: ±0.015% of reading ± 2 counts (measurement only)
Temperature: ±0.1°C (0.2°F) (measurement only) (Pt100 RTD)
General
Integrated internal electrically operated pneumatic pump:
generates -12 PSI to 150 PSI pressure (-0.8 to 10 Bar, -8 to 100 kPa)
Manual pump version: -12 to 300 PSI / -0.8 to 20 Bar
Environmental:
Operating Temperature: -10 °C to +50 °C
Storage Temperature: -20 °C to +60 °C
Power Requirements:
Battery: Eight (8) standard Alkaline AA batteries
Battery Life: 300 pump cycles to 150 PSI minimum 1000 pump cycles to 30 PSI
Physical:
Connections:
Pressure: 1/8” female NPT
Electrical: standard banana jacks
RTD: 4 pin LEMO style
External module: 6 pin LEMO style
Included Accessories: NIST traceable calibration certificate, batteries installed, test leads, test hose fittings, user guide, carrying case.

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

• Temperature compensation from -20°C to 50°C
• Pressure accuracy to 0.025% of reading
• Weight: 680g.
• Dimensions: 178mm x 110mm x 58mm

• Field-replaceable modules: pressure, temperature, current and voltage
• ATEX/IECEx intrinsically safe
• Log and display 500,000 points at up to 10 readings/sec on up to two modules simultaneously
Backlit Display
• Description: 255 x 160 pixel graphical display with integrated backlight
• Display rate: selectable up to 10 readings per second
Power
• AA Battery Module: Four size AA (LR6) batteries; user serviceable, non-chargeable
• Battery life: 200 hours typical (alkaline battery)
• Note: Chassis can be powered remotely by the mini-USB connector on the side of the product
• WARNING: Do not use USB interface in a hazardous atmosphere
Temperature
• Operating & Compensated: -20 to 50°C (-4 to 122°F)¹
• Storage: -40°C to 75°C (-40°F to 167°F)
¹No change in accuracy over operating range for all modules. Pressure sensor must be zeroed to achieve rated specification Humidity
• < 95% RH, non-condensing
IP Rating
• IP67 (1m immersion for 30 min) per ISO 60529

• Description (PDF)

- Price: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.